| Model |
Unit |
EH-66S |
EH-86S |
| X/Y/Z axis travel (longitudinal) |
mm |
660/580/550 |
860/580/550 |
| Spindle nose to table (pollet) center |
mm |
150-700 |
200-770 |
| Spindle center to table (pollet) top |
mm |
100-680 |
100-680 |
| Table area |
mm |
⌈500 |
⌈630 |
| Min indexing degree |
deg |
1°(0.001° OPT.) |
1°(0.001° OPT.) |
| Table max. looding |
kg |
⌈500(800opt.) |
1500(1000opt.) |
| Table top heigh (from the floor) |
mm |
1130 |
1130 |
| Spindle speed |
rpm |
12000 |
12000 |
| Spindle toper |
|
ISO 40 |
ISO 40 |
| Spindle diameter |
mm |
Ø 70 |
Ø 70 |
| Tool shank type |
|
DIN(BT , CAT , Opt) |
DIN(BT , CAT , Opt) |
| Rapid feed rate |
M/min |
36/32/36 |
36/32/36 |
| Cutting feed rate |
M/min |
20/20/20 |
20/20/20 |
| Tool storage capacity |
pcs |
24(40.60 opt.) |
24(40.60 opt.) |
| Max. tool dia. (Adjacent/Vacancy) |
mm |
Ø100 |
Ø100 |
| Max. tool length |
mm |
250 |
250 |
| Max. tool weight |
kg |
7 |
7 |
| Tool change time (tool to tool) |
sec. |
2.5 |
2.5 |
| Spindle motor |
kw |
7.5/11 |
7.5/11 |
| Serve motors(X/Y/Z axis) |
kw |
5.5/5.5/5.5 |
5.5/5.5/5.5 |
| ACT motor |
kw |
2.3 |
2.3 |
| Coolant pump |
kw |
1.9 |
1.9 |
| Hydraulic tank |
L |
90 |
90 |
| Lubricstion unit tank |
L |
2 |
2 |
| Water tank |
L |
310 |
310 |
| Air requirement |
kg/cm² |
6 |
6 |
| Power requirement |
KVA |
60 |
60 |
| Machine height |
mm |
3150 |
3150 |
| Floor space (Wx D ) |
mm |
1700 x 7900 |
2000 x 8400 |
| Machine Weight |
kg |
12000 |
13000 |
| Specifications are subject to R & D modification without any prior notice. |
